Maximum Reduction of Volatile Organic Compounds

The TX9000 is ideal for environments where an unusual degree of protection against a vast spectrum of possible VOCs is needed, and flow rate and cartridge longevity are secondary concerns. The restricted flow rate of 0.5 gallons / minute ensures its depth of reduction of the broadest range of VOCs and THMs, providing premium quality drinking water. This multi-stage filter encapsulated in a single cartridge should always be used with a dedicated faucet.

    Cartridge: Replace periodically.

    $127.00

    System: First-time purchase includes head assembly.

    $224.00

    0.5 micron membrane filtration. (See below for what this takes out.)

    Near-total reduction of cysts, oxidized iron, manganese, sulfides, and asbestos fibers.

    Requires a dedicated dispenser.

    Estimated cartridge longevity: 6 months.

    See below for NSF certified (Standards 42 and 53) contaminant reduction claims.

    Good to know

    What it filters

    How it works

    The rated capacity of 500 gal/min is based upon 200% NSF-certified claims if used when the full range of contaminants (VOCs and THMs) are present in the raw water. If your water isn’t that loaded with VOCs and THMs (and it probably isn’t), the filter can be used for longer.
    This product is NSF certified for near total reduction of:

    • Volatile Organic Compounds, including MTBEs, Trihalomethanes (THMs), and Chlorine taste and odor.
    • Near total reduction of cysts (including Cryptosporidium, Giardia, and Entamoeba), oxidized iron, manganese, sulfides, and asbestos fibers.
    Through Everpure’s exclusive precoat process, water flow automatically coats the unique Micropure® filter membrane, a proprietary blend of ultra-fine activated carbon. The Granular Activated Carbon chamber purges organic chemicals, including chlorine, VOCs, and THMs. The TX9000’s Ultrafiltration Membrane Chamber flow removes virtually all particulates down to 0.5 micron (at least 999 parts per thousand). 

    Parameters

    Technical specs & product documentation

    Operating pressure
    10 - 125 psi
    Operating temperature
    35 - 100°F (2 - 38°C)
    Dimensions System:
    18”H x 4”W x 4½”D
    Cartridge: 17¼”H x 3¼”W x 3¼”D

    Always allow minimum 2.5" clearance below the installed system to accommodate cartridge replacement.
    TX9000 Summary Data TX9000 Performance Data Sheet TX9000 Installation Instructions How Effective is the TX9000? An Inside Look at the TX9000
    Note: All filters are designed to operate in municipal water conditions -- which is how most people in the US get their water.  If your water source is a private well, these filters are not what you need.  Let us know if you need further assistance on this topic.

    See how the TX9000 transforms NYC tap water into bottled quality by removing all compromising water quality factors to undetectable levels

    Read Report

    CX9000

    Excellent value for lower cost

    The CX9000 delivers excellent filtration at a reduced cost. This product provides the same 0.5-micron filtration as the TX 9000 without the extra stage of activated carbon for VOC/THM reduction, thus offering greater longevity at a lower cost. The CX9000 is designed and NSF certified for a flow rate of 0.5 gallons/minute and should be used with a dedicated filtered water faucet. It is the perfect choice to make a dramatic difference in drinking water quality when cost is a vital factor.

    XL7000

    The Best Under the Sink Water Filtration System

    Choose this filter if you want broad spectrum filtration + bacteria reduction, along with the added values of a high flow rate, maximum cartridge longevity, and simplicity of installation. The XL7000 is designed and NSF-certified for a flow rate of 2.5 gallons / minute.